Cyclone Dust Collector

Compare INDUSTRIAL CYCLONE DUST COLLECTORS. An industrial cyclone dust collector is for large volume dust. Industrial cyclone dust collector removal efficiency is over 90% for 15 micron and larger dust particles. As such, the cyclone dust collector is often the first step, coarse removal, in a dust collection system requiring high quality air at the final output.

The most common cyclone dust collector configuration has the fan on the clean air side (pull through). Push through models with the fan on the input side are available.

Collection of the particulates can be in drawers, bins, 55 gal drums or air lock enclosures. Depending on the system capacity, one these methods comes standard. The air is drawn through the cyclone by either push through or pull through method. The push through method has the air fan on the side of the dust. In the pull through method, the fan is on the dust free side of the cyclone dust collector. Stands to raise the cyclone off the ground are required for all except those with drawers for dust removal. The stands may have to orderd separately for some models.

To handle the large volume of air, the inlet air duct of the cyclone dust collection system is large and is listed for each model. All are round to accept flexible or metal duct work.